Quality & testing
How we test every lot
Purity is only meaningful if you can verify it. Every lot we supply is tested by an independent laboratory before it ships, and the results travel with the product as a certificate of analysis tied to your exact lot number. This page walks through that process end to end — what we test, what gets documented, and how the material is supplied to your bench.
The process
Three steps from synthesis to your bench
We keep the path deliberately simple and fully documented, so you always know where a vial came from and how it was verified.
Synthesis & sourcing
Material is sourced from audited synthesis facilities and logged by lot the moment it arrives. Nothing enters inventory without a recorded lot number and a chain of custody we can trace back to its origin.
Independent testing
Every lot is sent to a third-party laboratory for reversed-phase HPLC purity and mass-spectrometry identity confirmation. We report the number the instrument returns — not a generic spec sheet copied between batches.
Documented & sealed
Results are published as a certificate of analysis tied to the exact lot. Each vial is supplied lyophilized and sealed, with written storage guidance included in the documentation.
Documentation
What's on a certificate of analysis
A certificate of analysis (COA) is the record that turns a claim into something you can check. Each COA is generated for a specific lot and includes the following:
- Lot number
A unique identifier that ties the vial in your hand to its test record.
- HPLC purity (%)
Reversed-phase chromatographic purity, reported as the measured percentage.
- Chromatogram
The HPLC trace itself, so you can review peak separation and integration.
- MS identity confirmation
Mass-spectrometry data confirming the observed mass against the expected mass.
- Appearance
A description of the physical form as supplied (typically a white lyophilized powder).
- Net peptide content
The mass of peptide in the vial, distinct from counter-ions, water, and residual salts.
Each COA is matched to its lot
Illustrative example
- Compound
- BPC-157
- Lot
- AR-2406-A
- Purity (HPLC)
- 99.4%
- MW
- 1419.5 g/mol
- CAS
- 137525-51-0
- Appearance
- White lyophilized powder
- Result
- Pass
After it arrives
Storage & handling
Material is supplied as a stable lyophilized powder. Once it reaches your lab, a few standard practices keep it in reference condition for the working life of the lot.
Supplied lyophilized
Each vial is sealed as a dry lyophilized powder, the form in which peptides remain most stable for handling and storage.
Store at −20°C
Keep the unopened powder at −20°C, protected from light and moisture, until you are ready to work with it.
Documentation on file
Each lot ships with its certificate of analysis, viewable on the product page so you can match results back to the vial in hand.
Lot integrity
The lot number on the vial matches its certificate of analysis, so every result stays traceable to the material on your bench.
Storage guidance is for your lab
Verified, lot by lot
Browse peptides documented to this standard
Every reference standard in the catalog is tested by a third-party lab and ships with a certificate of analysis tied to its lot.